ADLINK Technology NuPRO-A40H Скачать руководство пользователя страница 4

Страница: 4 / 100

Preface

Using this Manual

Audience and Scope

The NuPRO-A40H User’s Manual is intended for hardware

technicians and systems operators with knowledge of installing,
configuring and operating industrial grade single board computers.

Manual Organization

This manual is organized as follows:

Preface:

Presents important copyright notifications, disclaimers,

trademarks, and associated information on the proper understand-
ing and usage of this document and its associated product(s).

Chapter 1, Introduction:

Introduces the NuPRO-A40H, its fea-

tures, applications, and specifications, including functional
descriptions and board layout.

Chapter 2, Hardware Information:

Provides technical informa-

tion on connectors and jumpers for configuring the NuPRO-A40H.

Chapter 3, Getting Started:

Illustrates how to install components

on the NuPRO-A40H such as CPU, heatsink, and memory mod-
ules.

Chapter 4, Driver Installation:

Provides information on how to

install the NuPRO-A40H device drivers.

Chapter 5, BIOS Setup:

Describes basic navigation for the

AMIBIOS®8 BIOS setup utility.

Appendix A, Watchdog Timer:

Presents information on imple-

menting the watchdog timer.

Appendix B, System Resources:

Presents information on I/O

mapping, IRQ routing, and resource allocation.

Important Safety Instructions:

Presents safety instructions all

users must follow for the proper setup, installation and usage of
equipment and/or software.

Getting Service:

Contact information for ADLINK’s worldwide

offices.

Содержание NuPRO-A40H





































































































Результаты поиска

Содержание NuPRO-A40H

Отзывы:

Похожие инструкции для NuPRO-A40H

Бренды по названию

Популярные бренды

ADLINK Technology NuPRO-A40H, Руководство пользователя

Результаты поиска

Содержание NuPRO-A40H

Отзывы:

Похожие инструкции для NuPRO-A40H

Бренды по названию

Популярные бренды