Getting Started
23
NuPRO-A301
3
Getting Started
This chapter provides information on how to install components on
the NuPRO-A301 SBC.
3.1
Installing the CPU
The NuPRO-A301 supports a single Intel® Core™2 Duo, Pen-
tium® Dual Core, Pentium® 4, and Celeron® processor via the
surface mount LGA775 socket (Socket T).
To install the CPU:
1. Press the load lever (A), then disengage it from the
retention tab (B).
WARNING:
Disconnect all power supply to the board
before installing a CPU to prevent damaging
the board and CPU.
Do not touch socket contacts. Damaging the
contacts voids the product warranty. Follow
the installation instructions carefully to avoid
damaging SBC components.
A
B
Содержание NuPRO-A301
