manualshive.com logo in svg

ADLINK Technology NuPRO-595 Series, Руководство пользователя, Страница: 71 / 89

Поделиться
Скачать
ADLINK Technology NuPRO-595 Series Скачать руководство пользователя страница 71

  

Intel PIIX Bus Master IDE Driver Installation 

•

 63 

4.1 

System Requirements 

This section describes system requirements for the PIIX Bus Master IDE 
Device Driver for Windows 95 . This driver has been designed for and tested 
with Windows 95 only. This driver will only install on systems with Windows 
95. 

1. 

The system must contain a supported Intel processor and chipset 
configuration.  

2. 

Ensure that a mouse is connected to the system. 

3. 

One of the following versions of Windows 95 m ust be installed on the 
system prior to running utility program. 

Windows 95 4.00.950   (Retail) 

Windows 95 4.00.950a  (OSR1) 

Windows 95 4.00.950b  (OSR2 without USB Supplement) 

Windows 95 4.00.950b  (OSR2.1 with USB Supplement) 

4. 

This utility should only be used on desktop systems. The utility must 
not be executed on notebook or portable systems with or without 
dock. 

5. 

It is assumed that the BIOS properly initialized the 82371xB IDE 
interface for Bus Master IDE operation. 

6. 

There is no other non-82371xB IDE controllers (add-in IDE controller 
or sound board with IDE) enabled on the system. 

Содержание NuPRO-595 Series


























































































Отзывы:

Нет отзывов