manualshive.com logo in svg

ADLINK Technology NuPRO-595 Series, Руководство пользователя, Страница: 3 / 89

Поделиться
Скачать
ADLINK Technology NuPRO-595 Series Скачать руководство пользователя страница 3

  

 

Copyright Notice 

 

Manual Rev 1.60: July 27, 2001 

Part No:50-13011-201 

This publication is protected by copyright and all rights are reserved. No part 
of it may be reproduced or transmitted by any means or in any form, without 
prior consent of the original manufacturer.  

The information in this document has been carefully checked and is believed 
to be accurate. However, the original manufacturer assumes no 
responsibility for any inaccuracies that may appear in this manual. In no 
event will the original manufacturer be liable for direct, indirect, special, 
exemplary, incidental, incidental or consequential damages resulting from 
any defect or omission in this manual, even if advised of possibility of such 
damages. The material contained herein is for informational purposes only.  

 

Acknowledgments 

Award is a registered trademark of Award Software International, Inc. 

IBM and PS/2 are trademarks of International Business Machines 
Corporation. 

C&T is a trademark of Chips and Technologies Inc. 

Intel and Pentium are registered trademarks of Intel Corporation. 

Microsoft Windows is a registered trademark of Microsoft Corporation. 

All other product names or trademarks are properties of their respective 
owners. 

Содержание NuPRO-595 Series


























































































Отзывы:

Нет отзывов