Installation
••
9
2.4 PCI card Installation Outline
2.4.1
Hardware configuration
PCI card has plug and play PCI controller on board. The memory usage
(I/O port locations) of the PCI card is assigned by system BIOS. The
address assignment is done on a board-by-board basis for all PCI cards in
the system.
2.4.2
PCI slot selection
Your computer will probably have both PCI and ISA slots. Do not force the
PCI card into a PC/AT slot. The NuDAQ PCI card can be used in any PCI
slot.
Installation Procedures
1. Read through this manual, and setup the jumper according to your
application
2. Turn off your computer, Turn off all accessories (printer, modem,
monitor, etc.) connected to computer.
3. Remove the cover from your computer.
4. Select a 32-bit PCI expansion slot. PCI slots are short than ISA or
EISA slots and are usually white or ivory.
5. Before handling the PCI-7230/7233/7234, discharge any static
buildup on your body by touching the metal case of the computer.
Hold the edge and do not touch the components.
6. Position the board into the PCI slot you selected.
7. Secure the card in place at the rear panel of the system unit using
screw removed from the slot.
StockCheck.com