8
••
Installation
2.2 Unpacking
Your PCI-7230, cPCI-7230, PCI-7233, PCI-7233H or PCI-7234 card
contains sensitive electronic components that can be easily damaged by
static electricity.
The card should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the
same point as
the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and handling
may cause damage to your module. Be sure there are no shipping and
handing damages on the module before processing.
After opening the card module carton, extract the system module and place
it only on a grounded anti-static surface component side up.
Again inspect the module for damage. Press down on all the socketed IC's
to make sure that they are properly seated. Do this only with the module
place on a firm flat surface.
Note:
DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your PCI Card.
2.3 PCB Layout
PCI-7230
CN1
CN2
PCI Connector Chip
Figure 2.1 PCI-7230 PCB Layout
StockCheck.com