ADLINK Technology NuDAQ 6208 Series, Руководство пользователя

Страница: 18 / 43

10
••
Installation
2.6 Install 6208 Series Card to cPCI/PCI Connector
Note that the PC power should be
‘
OFF
’
before installing, and be careful
to install the cards properly and tighten the screw. Improper installation
of the cPCI/PCI cards may damage the cards.
2.6.1 Hardware configuration
Memory usage (I/O port locations) of the cPCI/PCI card is assigned by
system BIOS. The address assignment is done on a board-by-board
basis for all cPCI/PCI cards in the system.
2.5.2 PCI slot selection
Your computer probably have both PCI and ISA slots. Do not force the
PCI card into a PC/AT slot. PCI slots are shorter than ISA or EISA slots
and are usually white or ivory.
2.5.3 Installation Procedures
1. Turn off your computer.
2. Turn off all accessories (printer, modem, monitor, etc.) connected to
computer.
3. Remove the cover from your computer.
4. Select a 32-bit cPCI/PCI expansion slot.
5. Before handling the 6208 series card, discharge any static buildup
on your body by touching the metal case of the computer. Hold the
edge and do not touch the components.
6. Position the board into the cPCI/PCI slot you selected.
7. Secure the card in place at the rear panel of the system unit by
using screw removed from the slot.
2.5.4 Running the 6208UTIL.EXE
A testing program is included in this utility, you can check if your 6208
series card can work properly. Refer Chapter 6 for further detailed
information.