background image

 

 

 
ii 

Preface 

Preface 

Copyright 

Copyright 2017 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. 
All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in 
any form without prior written permission of the manufacturer.  

 

Disclaimer

 

The information in this document is subject to change without prior notice in order to improve reliability, design, and 
function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer 
be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use 
the product or documentation, even if advised of the possibility of such damages. 

 

Environmental Responsibility 

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with 
the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic 
Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to 
ensure that our products, manufacturing processes, components, and raw materials have as little impact on the 
environment as possible. When products are at their end of life, our customers are encouraged to dispose of them 
in accordance with the product disposal and/or recovery programs prescribed by their nation or company. 

 

Trademarks 

Product names mentioned herein are used for identification purposes only and may be trademarks and/or 
registered trademarks of their respective companies. 

 

Revision History 

 

Revision 

Description 

Date  

By 

1.00 Initial 

release 

2015-05-15 

JC 

1.1 

Update functional block diagram, mechanical drawing, board layout, pinouts and 
LED info 

2017-10-07 JC 

 

 

Содержание miniBASE-10R













































Отзывы: