background image

FCC Warning statement 
 
a.

 

for FCC 15b devices 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

 
b.

 

FCC Part 15.21 information for user 

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your 

authority to operate the equipment. 

 

c.

 

for mobile devices with co-location condition ( the transmitting antenna is installed or 
located more than 20cm away from the body of user and near by person ) 
 
FCC RF Radiation Exposure Statement: 

 

1.

 

This Transmitter has been demonstrated co-location compliance requirements with (Bluetooth , NFC , 2G, 3G )This transmitter must not be 

co-located or operating in conjunction with any other antenna or transmitter. 

2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed 

and operated with a minimum distance of 20 centimeters between the radiator and your body. 

 

RF exposure for cellular phone 

Cautions 

In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted 

an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those 

guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this 

phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized 

antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the 

phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local 

dealer for replacement antenna. 

Body-worn operation 

This device was tested for typical body-worn operations with the back of the phone kept 2.0cm from the body. To maintain compliance with 

FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 2.0cm separation distance between the user’s 

body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain 

metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure 

Содержание IMX-3000

































Отзывы: