manualshive.com logo in svg

ADLINK Technology DAQ-2501, Руководство пользователя

Поделиться
Скачать
ADLINK Technology DAQ-2501 Скачать руководство пользователя страница 34

Operation Theory

 25

DMA with Scatter Gathering Capability

In multi-user or multi-tasking OS such as Microsoft Windows,
Linux, etc., it would be difficult to allocate a large continuous
memory block due to memory fragmentation. PLX PCI control-
ler provides scatter /gather or chaining mode to link non-contin-
uous memory blocks into a linked list, so that users can
transfer large amounts of data without being limited by the frag-
ment of memory blocks.  Users can configure the linked list for
the input DMA channel and the output DMA channel, individu-
ally.  

Figure 4-5 shows the linked list that is constructed by three
DMA de-scriptors.  Each descriptor contains a PCI address, a
local address, a transfer size, and the pointer to the next
descriptor.  Users can thus collect fragmented memory blocks
and chain their associative DMA descriptors altogether. DAQ/
PXI-2500 SERIES software driver provides users easy ways to
setup scatter/gather functions.  Sample programs are also sup-
plied in the all-in-one CD.

Figure 4-5: Scatter/Gather DMA for data transfer

Содержание DAQ-2501



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды