Installation
••
9
2.5 PCI-7432/33/34 Installation Outline
2.5.1 Hardware configuration
PCI-7432/33/34 support plug and play, the card can requests
memory usage (I/O port locations) assigned by system BIOS.
The address assignment is done on a board-by-board basis for
all PCI-7432/33/34 in the system.
2.5.2 PCI slot selection
Your computer will probably have both PCI and ISA slots. Do not
force the PCI-7432/33/34 into a PC/AT slot.
2.5.3 Installation Procedures
1. Turn off your computer
2. Turn off all accessories (printer, modem, monitor, etc.)
connected to computer.
3. Remove the cover from your computer.
4. Select a 32-bit PCI expansion slot. PCI slots are short than
ISA or EISA slots and are usually white or ivory.
Caution !! Don‘t put PCI-7432/33/34 card into
ISA or EISA slot.
5. Before handling the PCI-7432/33/34, discharge any static
buildup on your body by touching the metal case of the
computer. Hold the edge and do not touch the components.
6. Position the board into the PCI slot you selected.
7. Secure the card in place at the rear panel of the system unit
using screw removed from the slot.
2.5.4 Running the 7432UTIL.EXE
A testing program is included in this utility, you can check if your
PCI card can work properly. Refer Section 5.2 for further detailed
information.(If your pci card is PCI-7433, then the disk will contain
7433UTIL.EXE. If your pci card is PCI-7434, then the disk will
contain 7434UTIL.EXE.)