ADLINK Technology cPCI-7200 Скачать руководство пользователя | Manualshive

Страница: 90 / 90

background image

Product Warranty/Service

••

81

Product Warranty/Service

Seller warrants that equipment furnished will be free form defects
in material and workmanship for a period of one year from the
confirmed date of purchase of the original buyer and that upon
written notice of any such defect, Seller will, at its option, repair
or replace the defective item under the terms of this warranty,
subject to the provisions and specific exclusions listed herein.

This warranty shall not apply to equipment that has been
previously repaired or altered outside our plant in any way as to,
in the judgment of the manufacturer, affect its reliability. Nor will it
apply if the equipment has been used in a manner exceeding its
specifications or if the serial number has been removed.

Seller does not assume any liability for consequential damages
as a result from our products uses, and in any event our liability
shall not exceed the original selling price of the equipment.

The equipment warranty shall constitute the sole and exclusive
remedy of any Buyer of Seller equipment and the sole and
exclusive liability of the Seller, its successors or assigns, in
connection with equipment purchased and in lieu of all other
warranties expressed implied or statutory, including, but not
limited to, any implied warranty of merchant ability or fitness and
all other obligations or liabilities of seller, its successors or
assigns.

The equipment must be returned postage-prepaid. Package it
securely and insure it. You will be charged for parts and labor if
you lack proof of date of purchase, or if the warranty period is
expired.

«
...
88
89
90

Содержание cPCI-7200



























































































Отзывы:

Нет отзывов

Похожие инструкции для cPCI-7200

Fast Track Ultra 8R

Бренд: M-Audio Страницы: 25

Бренд: Hama Страницы: 36

Бренд: 3Dlabs Страницы: 44

SoundBlaster X3

Бренд: Creative Страницы: 2

Бренд: StarTech.com Страницы: 11

Бренд: Digium Страницы: 73

Бренд: WNC Страницы: 32

Бренд: Exsys Страницы: 2

Бренд: ATI Technologies Страницы: 41

Бренд: Advantek Networks Страницы: 16

Бренд: Sealey Страницы: 49

Бренд: Digigram Страницы: 28

Бренд: Contec Страницы: 55

Бренд: Digigram Страницы: 12

Бренд: Digigram Страницы: 14

Бренд: Nordic ID Страницы: 12

Бренд: Nordic ID Страницы: 35

Бренд: Rosslare Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды