ADLINK Technology cPCI-7200 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 90

ADLINK Technology cPCI-7200 Скачать руководство пользователя страница 56

C/C++ & DLL Libraries

••

47

5.14 _7200_Alloc_DMA_Mem

@ Description

Contact Windows 95/98 system to allocate a block of contiguous
memory for single-buffered DMA transfer. This function is only
available in Windows 95/98 version.

@ Syntax

Visual C++ (Windows 95/98)

int W_7200_Alloc_DMA_Mem (U32 *buff, U32 *handle, U32

buf_size, U32 *actual_size)

Visual Basic (Windows 95/98)

W_7200_Alloc_DMA_Mem (buff As Long, handle As Long, ByVal

buf_size As Long, actual_size As Long ) As Long

@ Argument

buff :

The start address of the user buffer for DMA data
transfer. This buffer will be attached to the DMA
memory allocated by this function. When using this
DMA memory handle as an argument of
W_7200_DI_DMA_Start function, DI data will be
copied to this buffer. When using this DMA memory
handle as an argument of W_7200_DO_DMA_Start
function, the data stored in this buffer will be the DO
data.

handle:

The handle of system DMA memory returned from
system. Use this handle in _7200_DI_DMA_Start or
_7200_DO_DMA_Start.

buf_size:

Bytes to allocate. Please be careful, the unit of this
parameter is BYTE, not SAMPLE.

«
...
54
55
56
57
58
...
»

Содержание cPCI-7200



























































































Отзывы:

Нет отзывов