ADLINK Technology cPCI-6630 Series, Руководство пользователя

Страница: 52 / 139

40 Board Interfaces
Leading
EDGE COMPUTING
Force Ejector Handle Closed Switch (SW11)
Switch SW11 allows the ejector handle state to be forced "closed"
so that blades without ejector handles (e.g. conduction cooled) will
power on when inserted into the chassis.
PS/2 Front/Rear Switch (SW12)
Switch SW12 routes the PS/2 keyboard/mouse to either the front
panel or rear I/O.
Pin ON OFF
1
Force the ejector handle
state to "closed" (default)
On/Off state is controlled
by the ejector handle
2 NC NC (default)
NOTE:
NOTE:
When the On/Off state is controlled by the ejector handle (Pin 1
OFF), make sure to properly shut down the OS before opening
the handle. If the ejector handle is opened while the OS is
operating, power will be cut immediately, resulting in possible
system corruption and data loss.
Pin ON OFF
1 PS/2 to rear PS/2 to front (default)
2 Reserved Reserved
1 2
ON
1 2
ON