ADLINK Technology cPCI-6630 Series Скачать руководство пользователя страница 107

Страница: 107 / 139

BIOS Setup Utility

cPCI-6630

Software Feature Mask Configuration

RAID OROM/RST driver will refer to the SWFM configuration to
enable or disable the storage features.

RAID0/1/10/5

Enable or disable RAID0/1/10/5 feature.

Intel Rapid Recovery Technology

Enable or disable Intel Rapid Recovery Technology.

OROM UI and Banner

If enabled, the OROM UI is shown. Otherwise, no OROM ban-
ner or information will be displayed if all disks and RAID vol-
umes are Normal.

HDD Unlock

If enabled, the HDD password unlock in the OS is enabled.

LED Locate

If enabled, the LED/SGPIO hardware is attached and ping to
locate feature is enabled on the OS.

Содержание cPCI-6630 Series












































































































































Результаты поиска

Содержание cPCI-6630 Series

Отзывы:

Похожие инструкции для cPCI-6630 Series

Бренды по названию

Популярные бренды

ADLINK Technology cPCI-6630 Series, Руководство пользователя

Результаты поиска

Содержание cPCI-6630 Series

Отзывы:

Похожие инструкции для cPCI-6630 Series

Бренды по названию

Популярные бренды