ADLINK Technology AmITX-SL-G Скачать руководство пользователя страница 73

Страница: 73 / 78

AmITX-SL-G

BIOS Setup

8.3.21. Advanced > Security

Feature

Options

Description

Security

Info only

Intel TXT(LT) Support

Disabled
Enabled

Enables or Disables Intel(R) TXT(LT) support.

Security Configuration

BIOS Security Configuration settings.

Trusted Computing

Trusted Computing Settings.

8.3.22. Advanced > Security > Security Configuration

Feature

Options

Description

Security Configuration

Info only

RTC Lock

Disabled
Enabled

Enable will lock bytes 38h-3Fh in the lower/upper
128-byte bank of RTC RAM.

BIOS Lock

Disabled
Enabled

Enable/Disable the PCH BIOS Lock Enable feature.
Required to be enabled to ensure SMM protection of
flash.

8.3.23. Advanced > Security > Trusted Computing

Feature

Options

Description

Configuration

Info only

Security Device Support

Disabled
Enabled

Enables or Disables BIOS support for security
device. O.S. will not show Security Device. TCG EFI
protocol and INT1A interface will not be available.

TPM State

Disabled
Enabled

Enable/Disable Security Device. NOTE: Your
Computer will reboot during restart in order to change
State of the Device.

Pending operation

None
TPM Clear

Schedule an Operation for the Security Device.
NOTE: Your Computer will reboot during restart in
order to change State of Security Device."

Device Select

TPM 1.2
TPM 2.0
Auto

TPM 1.2 will restrict support to TPM 1.2 devices,
TPM 2.0 will restrict support to TPM 2.0 devices,
Auto will support both with the default set to TPM 2.0
devices if not found, TPM 1.2 devices will be
enumerated

Current Status Information

Info only

TCM Enabled Status:

Info only

TPM Active Status:

Info only

TPM Owner Status:

Info only

Содержание AmITX-SL-G















































































Результаты поиска

Содержание AmITX-SL-G

Отзывы:

Похожие инструкции для AmITX-SL-G

Бренды по названию

Популярные бренды

ADLINK Technology AmITX-SL-G, Руководство пользователя

Результаты поиска

Содержание AmITX-SL-G

Отзывы:

Похожие инструкции для AmITX-SL-G

Бренды по названию

Популярные бренды