Adler AD 7050, Руководство пользователя

Страница: 5 / 100

5
Prior to using the appliance on any surface or textile, always make sure that material is not sensitive to steam by doing a test on a
concealed area first before using it on a whole product/area.
Do not use the appliance for cleaning painted or plastic-coated surfaces such as the kitchen or living room furniture, doors, or parquet.
To clean these surfaces, steam a cloth briefly and use it to wipe over the surfaces.
NOTES:
Do not direct the steam at glued laminated edges as the edge may loosen.
Do not use the appliance for cleaning unsealed wood or parquet floors.
A6 - Nozzle adapter – Needed to use with other attachments.
A5 - Stand - Used for storing the device.
A4 - Fuzzy cloth – Used with the Cleaning disk. Can be used to clean flat, hard surfaces.
A3 - Cleaning disc – Can be used alone for ironing clothes.
A2 - Garment brush – Used on clothes, for removing hair and straightening fabrics.
Attachment for textile and disinfection: It can be used for cleaning small areas that can be washed down, shower cubicles, and mirrors.
Usually, the microfiber cloth/cleaning disc should be used with this accessory.
Small plastic/metal round brushes: The round brushes are used for cleaning stubborn dirt that can be removed more easily that way.
Steam nozzle: The steam nozzle can be used for the following application areas without accessories:
1. For removing slight creases from the hanging clothing items: Steam the clothing item from a distance of 10-20 cm.
2. For wiping damp dust: Steam a cloth briefly and use it to wipe over furniture.
Steam can damage sealed points of the window frame and, at low outside temperatures, lead to tension on the surface of window
panes and hence to glass breakages. Do not direct the steam at sealed points on the window frame. At low outside temperatures, heat up
the window panes by gently steaming the full surface of the glass. Clean the window area with a manual nozzle and cover. To remove the
water, use a squeegee or wipe the surfaces dry.
Plastic/metal brushes can scratch sensitive surfaces. They are not suitable for cleaning sensitive surfaces.
Allow the device to cool down and accessories to completely dry before storing them.
Store the appliance in a dry location that is protected from frost and direct sunlight.
USAGE – ACCESSORIES
1. Press and hold the Steam switch (B7). This will generate steam until you release the steam switch.
2. Single press the Steam switch (B7). This will generate steam until you press the Steam switch again or the water tank is empty.
Step 8: Once you are finished using the device, release or unlock the steam switch. Press the power switch to turn the device off.
NOTES:
It is suggested not to leave any unused water in the tank to avoid mold or lime scale build-up.
Do not use the device with the water container is empty.
Step 7: Once the light turns green you can start using the device. The device has 2 working modes:
Step 5: Plug the device into the power supply. Slide the power switch and the device will turn on. A red light will appear. Please wait until
the light turns Green before proceeding further.
Step 6: Exchange or insert any wanted accessory.
Step 4: Close the water silicon flap. And install it into the main device by sliding it into place.
NOTE: When filling the water, pay attention to the marking (MAX). Fill a maximum of 120 ml of distilled water or tap water into the water
container.
Step 3: Use the cup to fill water into the device.
Step 2: Take out the water container (B3) by sliding it backward and opening the small angular, silicon flap located on it.
Step 1: Place the device on a firm surface.
Using the device:
Step 2: The all brush and nozzle can be slid onto the nozzle adaptor (see Picture D).
Step 1: Push the rear end of any chosen accessory onto the steam nozzle and lock it by turning it counterclockwise. (see Picture C
）
.
NOTE: Before any disassembly or maintenance make sure, that the device is turned off and cooled down.
Assembling accessories:
Take out the product and the components, remove all packaging materials, and check for possible damage on any of them.
Before first use:
7. Steam switch
6. Indicated light (red/green)
- Green light: working.
- Red light: heating
4. Bottom 5. steam nozzle
PARTS LIST (see: Picture B ）
1. Power switch 2. Handle 3. Water tank
10. Cup
7. Rectangular brush 8. Round brush 9. Pointy nozzle
4. Fuzzy cloth 5. Stander 6. Nozzle adapter
1. Main unit 2. Garment brush 3. Cleaning disc
MAIN SET INCLUDES (see Picture A)
If the steam volume is reduced or stopped during use, water will probably have to be refilled. To do so please repeat points 2-4 from the
Using the device part of the manual.
It is highly recommended to use only distilled water to avoid lime scale clogging of the device and/or accessories.
Do not add any additives like perfume, vinegar, starch, dirt-cleaning gel, cleaning gel, or other chemical materials to water in the
container.