Adler AD 2239, Руководство пользователя

Страница: 4 / 60

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20.
21. The device is not designed to work with external schedulers or separate remote control
system
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use a hair curling iron in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using
sharp objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After using the machine, switch it off, remove each plug the power cord from the wall
outlet and wait before putting it to cool down.
34. Always before applying pieces of equipment on the device, make sure they are dry
outside and inside.
35. Do not obstruct in any way the inlet and the air outlet, eg .:by hair.
36. Do not direct the hot air flow on the power cord
37. Do not direct hot air toward eyes or other sensitive areas..
Do not leave the unit on to the wall outlet or power supply unit unattended.
PRODUCT DESCRIPTION (pic. 1)
1. - handle 2. - speed adjustment switch 3. - concentrator
4. - inlet cover grill 5 . - hang-up loop 6. - temperature adjustment 7. - cool shot
USING THE DEVICE
1. Set desired speed /temperate by switch (2)/(6):
0 - off 1 - low speed, hot air 2 - high speed, very hot air
CLEANING AND MAINTENANCE
1. Clean inlet cover grill ( 4 ) regularly from loose hair or other dust.
2. Dirty housing clean with wet soft cloth, then wipe to dry. Do not use any aggresive detergents.
3. Avoid any liquid to reach inside of the hair dryer.
TECHNICAL DATA
Power: 1800-2200W
Voltage: 220-240V~50Hz
4
DEUTSCH
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment.
Do not dispose this appliance in the common waste bin.