Page 1
1. Introduction Studio Mug
Press
The Studio Mug Press
has been produced specifically for transfer print
decoration of "white ware” porcelain mugs, dye sub coated. Mugs to be
printed must be cylindrical; the supplied wrap around heating element
will accommodate a Ø-80 mm large standard mug and optionally (at
extra cost) the machine will also accommodate a Ø-72 mm small
standard mug and a smug mug element.
This simple robust machine
is powered by a microprocessor for
control of both heat and dwell accuracy and ease of operation requiring
minimal operating space.
The Studio Mug Press
is produced in two versions, nominally 230-240
Volts AC for the European market and nominally 110 Volts for the
American market.
