Page 15
5.2 Operation Of Control Unit, Setting Time and Temperature
(The Heat Plate must always be in the down position before the Controller is set)
Setting Temperature
Setting Time
Switch on machine.
Press the 'OK' button to enter the
temperature setting mode (the ' '
light will flash).
Using the ' ' or ' ' buttons select
between ' ' or ' '.
Press the 'OK' button twice to enter
the temperature setting mode (the
temperature settings digits and 'SV'
will flash).
Use the ' ' or ' ' buttons to select
the temperature required for the
transfer material being used.
Press the 'OK' button to turn the
'SV' light and temperature settings
digits off.
1.
2.
3.
4.
5.
6.
Press the 'OK' button three times to
enter the time setting mode (the
'SV' and time settings lights will
flash).
Use the ' ' or ' ' buttons to select
the time required for the transfer
material being used.
Press the 'OK' button to turn the
'SV' and time settings lights off.
The digital display will now show
the rising temperature until the set
heat is achieved. At this point a
buzzer will sound to indicate that
the machine has reached the set
operating temperature and is ready
to use.
To reset the counter to zero press
and hold 'Reset' button for 5 seconds.
1.
2.
3.
4.
5.
Temperature
Settings
Time Settings
