EZ Control 6 instruction manual
4
4.6.3
Program Sound activate operation
1. Open the program which need be run
；
2. Click
RUN MODE
to enter into sound activate state
，
corresponding indicator light will be
ON
；
3. Adjust gliding time
（
It is not available to use putter to adjust running speed in sound activate
state!)
；
4. Click
UP
and
DOWN
to adjust sound activate sensitivity of current program
（
0~100%
）
；
Edit and run strobe function
.
The controller can set up the channel into the flash button to reach it, the flash
speed is 1~20 every second.
4.7
Edit and Run strobe function
4.7.1
Edit strobe function
1. Enter into programming state
；；
2. Click
STROBE
，
corresponding indicator light will be ON
；
3. Click FIXTURE1~16 to select the light (can select many lights)
4. Press
UP
and
DOWN
button to select the channel need the flash
；
5. Press
EDIT/REC
to confirm
，
indicator light flashs
，
edit and save it
；
6. Repeat the step 3~5 to finish the other channels edit and saved
；
7. Exit programming state.
4.7.2
Run strobe function
1. Press
STROBE
button for a while to operate the flash
；
2. Move STROBE SPEED putter to adjust the flash speed
（
1~20Hz
）
；
3. Loosen
STROBE
button to exit flash
；
4.7.3
Delete strobe function
1. Enter into programming state
；；
2. Click
STROBE
，
corresponding indicator light will be ON
；
3. Click FIXTURE1~16button to select the light need to delete the flash
；
4. Click
UP
and
DOWN
to select the channel which need delete the flash
；
5. Click
DEL/CLR
to confirm
，
indicator light flashs
，
delete successfully
；
6. Exit programming state.
4.8 USB Function
The controller can copy data and update software by USB
；
The 16 buttons of select light button
