Connections:
1.
AC CORD
Use this cable to connect the AC power cord to the unit.
2.
POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER
switch again.
3.
GND
Grounding lug for the turntable connection. Always use this connection. Always use this
connection when using turntables (your turntable cable should have a grounding wire).
4.
LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your
channel inputs when phono input is selected, you rsignal is fed directly to the high-quality
RIAA phono pre-amplifiers. Line level sources will overload the sensitive phono pre-amps
and will sound very bad, always be sure to toggle the line/phono switch over to line
before connection of line sources.
5.
INPUT
Plug in the line level device such as tape deck or additional CD player here.
6.
STEREO MAIN OUTPUT
Unbalanced RCA connectors controlled by the master fader.
7.
STEREO MAIN OUTPUT
Balanced XLR connectors controlled by the master fader.
Specifications:
Anti-Shock Buffer Memory: 40 seconds
Range of adjustments: +/- 12%
Power supply: 115 /230V – 50/60Hz
Dimensions: 18.98 x 10.24 x 4.33”
Содержание CDMB-5000
Страница 1: ...CDMB 5000 USER MANUAL...
Страница 2: ...Left Right Side Top Side...
