Page 1
1.
Introduction Beta Maxi
(115V) Press
The Beta Maxi (115V) Press
is a manually operated heat press for
transfer printing and material fusing. It is ideal for medium volume
production.
The work area
of the Beta Maxi (115V) Press is 15 in x 20 in
(38 cm x
50 cm)
, but machines may have, to special order, optional smaller sized
interchangeable worktables of any size and various shapes within these
table sizes.
The Beta Maxi (115V) Press
has a heat plate which swings away from
the operating position to clear the worktable for loading and unloading.
After loading the work piece, and with the correct settings for
temperature, pressure and dwell time, the heat plate is swung to the
operating position with the handle provided. The cycle is started by
pulling out the handle release knob allowing the handle to be pressed
down to the locking position. The micro switch is made which starts the
timer. When the set time elapses, the buzzer sounds. The handle-
locking knob can then be pulled out to permit the handle to be raised to
the vertical locked position. The heat plate may then be swung to the
unloading position.
