ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 2
Zipper
General Information
Unpacking:
Thank you for purchasing the Zipper by ADJ Products,
LLC. Every Zipper has been thoroughly tested and has been shipped
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be
sure all equipment necessary to operate the unit has arrived intact. In
the event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return this unit to your dealer without contacting customer sup-
port first.
Introduction:
The Zipper is a DMX intelligent LED quad barrel roller.
The Zipper has three operating modes; a sound active, show mode,
DMX controlled. The Zipper has 3 DMX mode; 1 channel mode, 3
channel mode, and 11 channel mode. The Zipper can operate as a
stand alone fixture or in a Master/Slave configuration. For best results
use fog or special effects smoke to enhance the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Zipper
Notes
ADJ Products, LLC - www.adj.com - Zipper Instruction Manual Page 25
