ADJ ZIPPER Скачать руководство пользователя страница 10

ADJ Products, LLC  -  www.adj.com  - Zipper Instruction Manual Page 9

 Zipper 

System Menu

System Menu: When making adjustments press ENTER to 

confirm your setup then press and hold the MENU button 

for at least 3 seconds. To exit without making any adjust-

ments press the MENU button. The display will lock after 30 

seconds, press the MENU button for 3 seconds to unlock. 

ADDR -

 

DMX Address Setting

.

1. Press the MENU button until “

ADDR

” is displayed, press

ENTER.
2. The current address will now be displayed and flashing.

Press the UP or DOWN buttons to find your desired address. 

When you have found your desired DMX address press ENTER 

then press and hold the MENU button for at least 3 seconds to 

set your desired DMX address. 
3. Connect your DMX Controller.

CHND -

 This will let select your desired DMX channel

mode.

1. Press the MENU button until “

CHND

” is displayed, press

ENTER. Either “

1CH

”, “

3CH

”, or “

11CH

” will be displayed

2. Press the UP or DOWN buttons to find your desired DMX

channel mode and press ENTER to confim and exit. 

SLND -

 This will let you set unit as a slave in a master-

slave configuration.

1. Press the MENU button until “

SLND

” is displayed, press

ENTER. Either “

MAST

”, “

SL 1

” or “

SL 2

” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is

displayed, and press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture 

to Master and then set the next fixture to “

SL 2

”, the fixtures 

ADJ Products, LLC  -  www.adj.com  - Zipper Instruction Manual Page 18

 Zipper

3 Channel Mode - DMX Traits & Values

  

Channel      Value 

          Function

         

1             

     PAN/TILT MOVEMENTS

0 - 7

0 DEGREES

8 - 22

MOVEMENT 1

23 - 37

MOVEMENT 2

38 - 52

MOVEMENT 3

53 - 67

MOVEMENT 4

68 - 82

MOVEMENT 5

83 - 97

MOVEMENT 6

98 - 112

MOVEMENT 7

113 - 127

MOVEMENT 8

128 - 142

MOVEMENT 9

143 - 157

MOVEMENT 10

158 - 172

MOVEMENT 11

173 - 187

MOVEMENT 12

188 - 202

MOVEMENT 13

203 - 217

MOVEMENT 14

218 - 232

MOVEMENT 15

233 - 247

MOVEMENT 16

248 - 255      SOUND ACTIVE MOVEMENT 1-16

        2

DIMMER

0 - 255

0% - 100%

        3

STROBING

0 - 7

OFF

8 - 15

OPEN

16 - 131             STROBING SLOW - FAST

132 - 139

OPEN

140 - 181         PULSE EFFECT SLOW - FAST

FAST CLOSE - SLOW OPEN

182 - 189

OPEN

190 - 231         PULSE EFFECT SLOW - FAST

SLOW CLOSE - FAST OPEN

232 - 239

OPEN

240 - 247           SOUND ACTIVE STROBING

  

248 - 255 

 OPEN

Содержание ZIPPER















Отзывы: