ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 44
ADJ Products, LLC - www.adj.com - Vizi Q Wash7 Instruction Manual Page 45
(Fade Time)
(Fade Time)
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
Vizi Q Wash7
Dimmer Curve Chart
Fuse Replacement:
First unplug the power. The fuse holder is located
above the PowerCON connection. Using a flat head screw driver
unscrew the fuse holder. Remove the bad fuse and replace with a new
one.
Vizi Q Wash7
Fuse Replacement
With this feature you can connect the fixtures to one another
using the PowerCOn input and output sockets. The quantity that
can be connected is 5 fixtures maximum @ 110V and a maximum
11 fixture’s @ 240V. After maximum limit has been reached you
will need to use a new power outlet. They must be the same fix-
tures. DO NOT mix fixtures.
Vizi Q Wash7
Power Cord Daisy Chain
Vizi Q Wash7
Cleaning
Vizi Q Wash7
Trouble Shooting
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
no light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the back panel of the unit next to the PowerCON input connec-
tion.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.