background image

ADJ Products, LLC  -  www.adj.com  - VBar Pak User Manual Page 3

ADJ Products, LLC -  www.adj.com  - VBar Pak User Manual Page 2

•  Mulit-Colors

•   Five Operating Modes

•  Electronic Dimming 0-100%

•   Built in Microphone

•   DMX-512 protocol

•  3-Pin DMX Connection

•   Eight DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel  

  Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 7    

  Channel Mode, & 8 Channel Mode

•  ADJ LED RC2 Included

•  Power Cord Daisy Chain (See page 21)

 VBar Pak                                         Warranty Registration

 VBar Pak                                                                Features

The  VBar  Pak carries a 2  year  limited  warranty.  Please  fill  out  the 

enclosed warranty card to validate your purchase. All returned service 

items whether under warranty or not, must be freight pre-paid and 

accompany  a  return  authorization  (R.A.)  number.  The  R.A.  number 

must be clearly written on the outside of the return package. A brief 

description of the problem as well as the R.A. number must also be 

written down on a piece of paper included in the shipping carton. If 

the unit is under warranty, you must provide a copy of your proof of 

purchase invoice. You may obtain a R.A. number by contacting our 

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number 

on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided), 

affixing it to the mounting bracket that is provided with the unit. 

Always ensure that the unit is firmly fixed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you 

are attaching the unit is secure and is able to support a weight of 10 

times the unit’s weight. Also, always use a safety cable that can hold 

12 times the weight of the unit when installing the fixture.

The equipment must be installed by a professional, and it must be 

installed in a place where it is out of the reach of people’s grasp.

 VBar Pak                                                             Installation

 VBar Pak                                                           Introduction

Unpacking:

 

Thank you for purchasing the VBar Pak by ADJ Products, 

LLC. Every VBar Pak has been thoroughly tested and has been shipped 

in perfect operating condition. Carefully check the shipping carton for 

damage that may have occurred during shipping. If the carton appears 

to be damaged, carefully inspect your fixture for any damage and be 

sure all accessories necessary to operate the unit has arrived intact. In 

the case damage has been found or parts are missing, please contact 

our toll free customer support number for further instructions. Do not 

return this unit to your dealer without first contacting customer sup-

port. 
Introduction:

 

The ADJ

 

VBar is a DMX intelligent, LED bar fixture. This 

fixture can be used in a stand alone mode or connected in a Master/

Slave configuration. This wash has five operating modes: Sound Active 

mode, Auto Run mode, RGBA Dimmer mode, Static Color mode, and 

DMX control.

 

Customer Support: ADJ Products, LLC provides a customer support 

line, to provide set up help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Содержание VBar Pak













Отзывы: