ADJ Products, LLC - www.adj.com - Ultra Hex Bar 6 User Manual Page 9
Ultra Hex Bar 6 Operating Instructions
the UP and DOWN buttons to adjust intensity.
8. After you have adjusted the colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the strobe mode.
9. “STRO: XX” will be displayed, this is strobe mode. The strobe
can be adjusted between “00” (flash off) to “15” (fastest flash).
Sound Active Mode:
In this mode the Ultra Hex Bar 6 will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until “SOUND” is
displayed.
2. Use the UP or DOWN buttons to adjust the sound sensitivity.
“00” is off, “01 is the least sensitive, and “16” is the most sensi-
tive.
3. After you have adjusted the sound sensitivity you can then acti-
vate strobing by pressing the SET UP button to enter the strobe
mode.
4. “STRO: XX” will be displayed, this is strobe mode. The strobe can
be adjusted between “00” (flash off) to “15” (fastest flash).
Program Mode:
1. Plug the fixture in and press the MODE button until “PROG RUN”
is displayed. Press the SET UP button so that “PROG: XX” is dis-
played.
2. Use the UP or DOWN buttons to scroll through the 20 programs.
Once you have found your desired program press the SET UP
button to adjust the program speed.
3. “SPEED:XX” will be displayed. Use the UP or DOWN button to
adjust the speed between “01” (slowest) and “16” (fastest). Once
you have set your desired running speed, press the SET UP but-
ton to to enter the fade adjustment mode.
4. “FADE: XX” will be displayed. Use the UP or DOWN button to
adjust the speed between “01” (fastest) and “16” (slowest) or “00”
(Off).
5. After you have adjusted the fade speed you can then activate
strobing by pressing the SET UP button to enter the strobe mode.
6. “STRO: XX” will be displayed, this is strobe mode. The strobe can
be adjusted between “00” (flash off) to “15” (fastest flash).
ADJ Products, LLC - www.adj.com - Ultra Hex Bar 6 User Manual Page 14
Ultra Hex Bar 6 ADJ RFC Operation
SOUND ACTIVE -
This button activates sound active mode. Use the
“+” & “-” buttons to adjust the sound sensitivity level.
R G B W/A -
Press either one of these buttons and the press the
“+” or “-” to adjust the brightness. Press the Flash button to activate
strobing and use the “+” or “-” buttons to adjust the strobe speed.
NOTE: Press the W/A button to scroll through White, Amber, and UV.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the
Auto Run, fade speed, sound sensitivity, and output intensity. Use
these buttons to scroll through the static colors.
