ADJ Products, LLC - www.adj.com - Rayzer User Manual Page 17
Rayzer
ADJ UC IR/ Airstream IR Control
The ADJ UC IR (not included) infrared remote gives you control of various functions (See below).
To control the Rayzer you must aim the remote at the front of the fixture and be no more than 30 feet
away.
The ADJ Airstream IR remote transmitter (not included) plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor and be no more than 15 feet away. After
you have purchased the Airstream IR transmitters, the app is a free download from the app store for
your iOS phone or tablet. The app comes with 3 pages of control depending on the fixture you are
using. Please see below for IR functions including the corresponding app page.
Stand by
Full ON
Fade/Gobo
Strobe
Color
1
2
3
4
5
6
7
8
9
Sound On
Show 0
Sound Off
Works with App page 1
STAND BY
Pressing this button will blackout the fixture. Press the button again to return to the original state.
FULL ON
Press this button down to fully light up the unit. Release this button to return to the original state.
FADE/GOBO
This button is invalid for this unit.
DIMMER “+” and DIMMER “-”
Use these buttons to adjust the output intensity.
STROBE
Press and hold this button to activate strobing.
COLOR
Press this button and use buttons 1-4 to select your desired color.
1-9
Buttons 1-4 are used with the Color button to select your desired color.
SOUND ON & OFF
These buttons are used to activate and deactivate sound active mode.
SHOW 0
Press this button to activate Show 0. Use numbers 1-9 to select shows 1-9.