ADJ STA962, Руководство пользователя, Страница: 9 / 18

ADJ Products, LLC - www.adj.com - Starburst User Manual Page 9
System Menu: When making adjustments press ENTER to confirm your setup. To exit without
making any adjustments press the MODE button. After 10 seconds, the display will return to
the DMX address setting. Your operating mode will still continue to run despite the display
showing the DMX address setting. The display will lock after 30 seconds, press the MODE but-
ton for 3 seconds to unlock.
Addr - DMX Address Setting. See DMX Control section for more information on DMX Control.
To run DMX mode, you must first turn AUTO off. Please see AUTO below for instructions on
how to turn AUTO mode off.
1. Press the either the MODE button until “Addr” is displayed, and press ENTER.
2. Press the UP or DOWN buttons to find your desired address. Press ENTER to set your desired
DMX address.
SCNd - This will let you set the unit as a primary in a primary/secondary configuration.
1. Press the MODE button until “SCnd” is displayed. Press ENTER. Either “PRI”, “SEC1”, or “SEC2”
will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, press ENTER to confirm.
ShNd - Show Mode.
1. Press the MODE button until “ShNd” is displayed, and press ENTER.
2. The unit will now operate in pre-programmed show mode.
SoSe - Sound sensitivity adjustment.
1. Press the MODE button until “SoSe” is displayed, and press ENTER.
2. Press the UP or DOWN buttons to adjust the sound sensitivity. Press ENTER when you have
reached your desired setting.
dNSt - In the event that the DMX signal is lost, the fixture will default to the operating mode
selected in this setting menu.
1. Press the MODE button until “dNSt” is displayed, and press ENTER.
2. Press the UP and DOWN buttons to select the desired setting.
A. “PrSe” - Defaults to primary/secondary mode. The unit will behave as defined in the primary/
secondary configuration menu (“SCNd”).
B. “bLNd” - Defaults to standby mode.
C. “LASt” - Defaults to most recently used settings.
3. Press ENTER to confirm your selection.
Starburst System Menu