ADJ STA962, Руководство пользователя, Страница: 10 / 18

ADJ Products, LLC - www.adj.com - Starburst User Manual Page 10
Starburst System Menu
NAnu - Manual Control Mode. Allows the user to manually set the following from 0 to 255:
1. Press the MODE button until “NAnu” is displayed, and press ENTER.
2. Use the UP and DOWN buttons to scroll through the various functions. Once you have found your
desired function, press ENTER to select. Available functions are:
A. “rEd” - Red
B. “GrEE” - Green
C. “bLuE” - Blue
D. “UhIt” - White
E. “PurP” - Purple
F. “dINN” - Dimmer
G. “Stro” - Strobe
H. “Noto” - Motor Control
3. Use the UP and DOWN buttons to adjust the values for the selected function. Available values
range from 0 to 255. Press the MENU button to exit to the main menu.
LEd - Allows the user to set the LED display screen to turn off after 10 seconds of inactivity.
1. Press the MODE button until “LEd” is displayed, and press ENTER.
2. Use the UP and DOWN buttons to toggle between ON and OFF. ON keeps the display screen on
at all times, while OFF will turn the screen off after 10 seconds of inactivity.
dISP - Select the orientation of the display screen.
1. Press the MODE button until “dISP” is displayed, and press ENTER.
2. Use the UP and DOWN button to toggle between “dISP” (upright display orientation) and “dSIP”
(inverted display orientation).
3. Press ENTER to confirm your selection.
FhrS - Display fixture hours.
1. Press the MODE button until “FhrS” is displayed, and press ENTER.
2. The screen will now display the number of operating hours.
vEr - Display software version.
1. Press the MODE button until “vEr” is displayed, and press ENTER.
2. The screen will display the current software version.
rSEt - Use this function to restore the unit to its factory settings.
1. Press the MODE button until “rSEt” is displayed, and press ENTER.
2. The unit will now reset to the default factory settings.