ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 14
ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 13
Ricochet
ADJ UC IR Control
The
UC IR (sold separately)
infrared remote gives you control of
various functions (See below)
. To control the fixture you must aim
the remote at the front of the fixture and be no more then 30 feet
away.
STAND BY
-
Pressing this button will blackout the fixture.
FULL ON
-
Press this button for full intensity. Once the button is re-
leased it will return normal intensity.
FADE/GOBO
-
This button is invalid for this fixture.
“” and “DIMMER -” -
Use these buttons to adjust the out-
put intensity.
STROBE
-
This button is invalid for the fixture.
COLOR
-
Press this button and use buttons 1-9 to adjust speed and
direction.
1-9
-
When Show 0 is pressed, buttons 1-6 will allow you to select a
show mode to run. When the Color button is pressed, buttons 1-9 will
control speed and direction.
SOUND ON & OFF -
Use the buttons to activate and deactivate
sound active mode.
SHOW 0 -
This activates the show mode. Use buttons 1-6 to select
your desired show.
Ricochet
DMX Control
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller
to control the master dimmer, rotation and
color.
A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The Ricochet has 2 DMX channel modes; 12 & 15 channels. See
pages 15-22 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are includ-
ed with your DMX controller. Follow the instructions on page 8 to
set the DMX address.
3. Use the controller’s faders to control the various DMX fixture traits.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
5. For help operating in DMX mode consult the manual included
with your DMX controller.
Ricochet
Master-Slave Configuration
Master-Slave Configuration
This function will allow you to link up
to 16 units together and operate without a controller. In a Master-Slave
set up one unit will act as the controlling unit and the others will react
to the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired show. Next, press the MENU
button until “Slave Mode” is displayed, and press ENTER. Press
the UP or DOWN buttons so that “Master” is displayed and press
ENTER.
3. On the slave units press the MENU button until “Slave Mode” is
displayed, and press ENTER. Press the UP or DOWN buttons so
that either “Slave 1” or “Slave 2” is displayed and press ENTER.
4. The slave units will now follow the Master unit.
