ADJ Products, LLC - www.adj.com - Quad Scan Pro Instruction Manual Page 15
ADJ Products, LLC - www.adj.com - Quad Scan Pro Instruction Manual Page 14
Quad Scan Pro
Operation
con firm. See pages 10-11 for more info.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See page 16 for UC3
controls and functions.
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button. After you have set your desired
show, press the MENU button until “SLND” is displayed, and Press
ENTER. Press the UP or DOWN buttons until “MAST” is dis-
played, and press ENTER to confirm.
3. On the slave units
press the MENU button until “SLND” is dis-
played, and press ENTER. Press the UP or DOWN buttons until
either “SL 1” or “SL 2” is displayed, choose your desired slave
mode and press ENTER to confirm.
4. The slave units will now follow the Master unit.
NOTE: In a Master/Slave configuration you can set one fixture to
Master or Slave 1 (SL 1) and then set the next fixture to Slave 2 (SL
2), in doing this the fixtures will now have contrast movement to each
other.
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller to control the chases and patterns, dimmer
and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Quad Scan Pro can be a 1, 5, or 32 DMX channel fixture.
See pages 16-21 for detailed description of the DMX values and
traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 6-8 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. Follow the instructions on page 10 to set the DMX address.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
Note: This mode runs in conjuction with show mode. You should
select a show previous to activating sound active mode.
1. Press the MENU button until “SOUN” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons so that “ON” is displayed, and
press ENTER to confirm and then hold MENU for at least 2-3 sec-
onds.
3. To adjust the sound sensitivity press the MENU button until
“SENS” is displayed and press ENTER. Use the UP or DOWN
buttons to adjust sensitivity.
4.
The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See page 16 for UC3
controls and functions.
Show Mode:
In this mode you can select 1 of 16 shows to run. This
mode can run as just an ordinary show, or with sound active mode.
1. Press the MENU button until
“SHND” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons until you find your desired show,
and press ENTER then press and hold MENU for 3 seconds to
Quad Scan Pro
Operation
