ADJ POW-R BAR65, Руководство пользователя, Страница: 8 / 12

www.adj.com
8
S A F E T Y G U I D E L I N E S
DO NOT
position device close to any
FLAMMABLE MATERIALS
while operating.
DO NOT attempt installation and/or operation without knowledge how to do so.
DO NOT
permit operation by persons who are not qualified to operate this type of device.
DO NOT shake device, avoid brute force when installing and/or operating.
DO NOT
operate this device if the main power cord has become frayed, crimped and/or damaged.
Replace any damaged power cords with a similar power rating.
DO NOT
remove or break-off the ground plug from the power cord.
DO NOT
remove disassemble device, there are NO user serviceable parts inside.
ALWAYS disconnect device from main power source before performing any cleaning.
ALWAYS be sure to install this device in an area that will allow proper ventilation. Allow
approximately 6 inches (15cm) between this device and a wall or fixture.
Power cords plugged into the device should be safely routed and secured so they are not likely
walked on, pinched, or placed under heavy items.
Disconnect the main power during long periods of non-use.
Only use recommended rigging hardware as described in this guide.
Use the original packaging and materials to transport the device in for service.
This device should be serviced by qualified service personnel when:
The power cord or plug has become damaged.
Objects have fallen on and/or liquid has spilled into the device.
The device has been exposed to rain and/or moisture.
The device does not operate normally or exhibits a marked change in performance.