ADJ PIN363, Руководство пользователя

Страница: 10 / 16

10
I N S TA L L AT I O N
There are two possible installation methods for this unit.
X-Clip Method: The unit includes an X-Clip to allow installation from drop down ceilings. Always
ensure that the unit is firmly fixed to avoid vibration and slipping during operation. Always ensure
that the structure to which you are attaching the unit is secure and capable of supporting at least 10
times the unit’s weight. Always use a safety cable that can hold 12 times the unit’s weight when doing
installing the unit in a suspended environment. The safety cable should go through the eye hole nut
that holds the X-Clip base in place.
Magnetic Base Method: The unit’s magantic base can also be used for installation to magnetic sur-
faces. Remove the X-Clip base by unscrewing the eye hole bolt. The unit can now be stuck to any
magnetic surface.
Regardless of the chosen installation method, the equipment must be installed by a profes-
sional, and it must be installed in a place where it is out of the reach of the general public.
C O L O R F I LT E R I N S TA L L AT I O N
This fixture includes with 4 color filters and 1 frost filter. To install any of these filters, carefully remove
the retainer ring in front of the lens, then install the filter and replace the retainer ring. Make sure the
filter cut out for the infrared receiver is in the correct place.