background image

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture

•   Do not spill water or other liquids into or on to your unit.

•   Be sure that the local power outlet match that of the required volt-

   age for your unit.

•   Do not attempt to operate this unit if the power cord has been 

   frayed or broken. 

•   Do not attempt to remove or break off the ground prong from    

   the electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.

•   Do not remove the cover under any conditions. There are no user  

   serviceable parts inside.

•   Never operate this unit when it’s cover is removed.

•   Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•   Do not attempt to operate this unit, if it becomes damaged.

•   This unit is intended for indoor use only, use of this product out-

   doors voids all warranties.

•   Always mount this unit in safe and stable matter.

•   Power-supply cords should be routed so that they are not likely to  

   be walked on or pinched by items placed upon or against them,  

   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 

• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 17 for cleaning details.

•   Heat -This fixture should be situated away from heat sources such 

   as radiators, heat registers, stoves, or other appliances (including 

   amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. Objects have fallen, or liquid has been spilled into the appliance.

    B. The appliance has been exposed to rain or water.

    C. The appliance does not appear to operate normally or exhibits a  

     

  

 marked change in performance.

 Monster Quad  

 

                       Safety Precautions

ADJ Products, LLC  -  www.adj.com  - Monster Quad Instruction Manual Page 4

ADJ Products, LLC  -  www.adj.com  - Monster Quad Instruction Manual Page 5

 Monster Quad  

 

                    Hanging Precautions

Fixture installation must always be secured with a secondary 

safety attachment, such as an appropriate safety cable.
Regardless of the rigging option you choose for your Monster 

Quad always be sure to secure your fixture with a safety cable 

(not included). Attach a safety cable to the provided safety bolt.  
Caution: For added protection mount the fixtures in areas out-

side of walking paths, seating areas, or areas were the fixture 

might be reached by unauthorized personal. 
Before mounting the fixture to any surface, make sure that the 

installation area can hold a minimum point load of 10 times the 

device’s weight.
To avoid injury, never stand directly below the device when 

mounting, removing, or servicing the fixture.
Always use and install a safety cable ( not included) as a safety 

measure to prevent accidental damage and/or injury in the 

event the clamp fails. 
Be sure to complete all rigging and installation procedures 

before connecting the main power cord to the appropriate wall 

outlet.

Содержание Monster Quad











Отзывы: