ADJ MOD HEX100, Инструкция пользователя

Страница: 30 / 33

ADJ Products, LLC - www.adj.com - MOD HEX100 User Manual Page 29
MOD HEX100 Trouble Shooting
MOD HEX100 Cleaning
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on
some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi
-
due, dust, dew).
MOD HEX100 Multiple Unit Power Linking
With this feature you can connect the 昀椀xtures to one another using the powerCON input and
output sockets. The maximum that can be connected is 5 昀椀xtures @ 120V and 9 昀椀xtures @
240V. After the maximum connected 昀椀xtures you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE MOD HEX100 AS
THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!