background image

A.D.J. Supply Europe B.V. 

– www.americandj.eu – Micro Galaxian II User Instructions Page 4 

INOZIONE

  

GENERAL INTRODUCTION 

 
Unpacking

: Thank you  for  purchasing the Micro  Galaxian  II by ADJ Products, LLC. Every  Micro  Galaxian II 

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the  carton  appears  to  be  damaged,  carefully 
inspect your fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact. 
In  the  event  damage  has  been  found  or  parts  are  missing,  please  contact  our  toll  free  customer  support 
number  for  further  instructions.  Please  do  not  return  this  unit  to  your  dealer  without  contacting  customer 
support first.  
 

Introduction

: The Micro Galaxian II is an simple, small, bright, green and red laser fixture. The Micro Galaxian 

II is a stand alone fixture with 2 operating modes. 

For best results use fog or special effects smoke to enhance 

the beams projections.   

 

Customer Support:

 If you encounter any problems, please contact your  trusted American Audio shop. 

We also offer the possibility, to contact us directly: You can contact us via our website 

www.americandj.eu

 or 

via email: 

[email protected]

 

Warning! 

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.  

Caution! 

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will 

void  your  manufactures  warranty.  In  the  unlikely  event  your  unit  may  require  service  please  contact  ADJ 
customer support. 

PLEASE recycle the shipping carton whenever possible. 

 

GENERAL INSTRUCTIONS 

 
Please carefully read and understand the instructions in this manual thoroughly before attempting to operate 
this  unit.  These  instructions  contain  important  safety  information  regarding  the  use  and  maintenance  of  this 
unit. Please keep this manual with the unit, for future reference. 

CAUTION IMPORTANT! When installing this projector, make sure that it is mounted in a manner that 
prevents the audience from looking directly into the beam, and the beam from striking the audience.

 

 

FEATURES 

 
• 30mW Green Laser 
• 80mW Red Laser 
• 2 Operating Modes - Sound Active Mode & Auto Mode  
• UC Laser IR Wireless Remote Control (Included) 
• Dual Hanging Bracket 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание Micro Galaxian II














Отзывы: