The
UC IR (sold separately)
infrared remote gives you control of various functions (See below). To
control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away.
To use the ADJ UC IR you must first activate the fixtures infrared sen- sor, to activate the sensor please
see the instructions on page 14.
The
Airstream IR (sold separately)
remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOS phone
or tab- let and aim the transmitter at the fixture sensor and be no more than 15 feet away. After you have
purchased the Airstream IR transmitters, the app is a free download from the app store for your iOS
phone or tablet. The app comes with 3 pages of control depending on the fixture you are using. Please
see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY
- Pressing this button will blackout the fixture. Press the button again to return to the initial
state.
FULL ON
- Hold this button down to fully light up the unit. When you let the button go, the unit will return
to its previous state.
FADE/GOBO
- This button activates color fade mode.
“
” and “
DIMMER -
” - These buttons are used to adjust the color output intensity in static color
mode.
STROBE
- Press and hold this button for strobing.
COLOR
- Press this button to activate color mode. Use buttons 1-9 to find your desired color.
1-9
- Use buttons 1-9 to select your desired color when color mode is active, and your desired show
when show mode is active.
SOUND ON & OFF
- Use the buttons to activate and deactivate sound active mode.
SHOW 0
- Press this button to activate show mode. Use buttons 1-9 to find your desired show. Press
the Show 0 button twice to run show 10, and button 1 twice to run show 11.
Mega QA Go
UC IR & Airstream App Control
ADJ Products, LLC — www.adj.com — Mega QA Go - User Manual — Page
14
