background image

9

INSTALLATION

FLAMMABLE MATERIAL WARNING

Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotech-

nics.

ELECTRICAL CONNECTIONS

A qualified electrician should be used for all electrical connections and/or installations.

MINIMUM DISTANCE TO OBJECTS/SURFACES IS 6.6 FEET (2 METERS).

MINIMUM DISTANCE OF INFLAMMABLE MATERIALS FROM THE SURFACE IS 1.6 

FEET (0.5 METER)

DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!

•  Fixture MUST be installed following all local, national, and country commercial electrical and con-

struction codes and regulations.

•  Ambient temperature operating range is 

-

4° F to 158° F (-20°C to 70°C). Do not use operate the 

unit when ambient temperature falls outside of this range!

•  Device(s) should be installed in areas outside walking paths, seating areas, or areas were unau-

thorized personnel might reach the fixture by hand.

•  Allow approximately 60 minutes for the fixture to cool down before servicing.

IP RATING

This device is IP20 rated. This means that the unit is protected against intrusion from solids 

approximately the size of an adult finger (12mm in diameter), and that the unit is NOT protected 

against water intrusion of any kind!

DO NOT EXPOSE TO RAIN OR MOISTURE!

INDOOR USE ONLY!

Содержание MDF2PSUX117















Отзывы: