ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 20
ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 21
Inno Spot Pro
Operation
press ENTER. Tap the UP or DOWN buttons so that “
ON
” is dis
played and press ENTER.
2. To adjust the sound sensitivity, press MENU button until “Sound
Sense” is displayed and press ENTER.
3. Use the UP and DOWN buttons to adjust the sensitivity, and
press ENTER when you have found your desired sensitivity level.
4. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Press the MENU button until “
Show Mode
” is displayed, and
press ENTER.
2. Press the UP or DOWN buttons until you find your desired show,
and press ENTER.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Inno Spot Pro UC3 Control
The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Show
1-4
1. Select Color
2. Select Gobo
Mode
Sound (LED OFF)
Show (LED
Slow Blinking)
LED ON
Inno Spot Pro
DMX Traits
Channel Value
Function
1 0 - 255 PAN
2 0 - 255 PAN FINE
3 0 - 255 TILT
4 0 - 255 TILT FINE
5 COLORS
0 - 7 WHITE
8 - 14 RED
15 - 21 ORANGE
22 - 28 YELLOW
29 - 35 GREEN
36 - 42 BLUE
43 - 49 PURPLE
50 - 56 LIGHT BLUE
57 - 63 PINK
64 - 127 COLOR MIXING
128 - 189 CLOCKWISE ROTATION FAST - SLOW
190 - 193 STOP
194 - 255 COUNTER CLOCKWISE ROTATION
SLOW - FAST
6 GOBO WHEEL
0 - 9 SPOT
10 - 18 GOBO 1
19 - 27 GOBO 2
28 - 36 GOBO 3
37 - 45 GOBO 4
46 - 54 GOBO 5
55 - 63 GOBO 6
64 - 73 SPOT SHAKE
74 - 82 GOBO 1 SHAKE
83 - 91 GOBO 2 SHAKE
92 - 100 GOBO 3 SHAKE
101 - 109 GOBO 4 SHAKE
110 - 118 GOBO 5 SHAKE
119 - 127 GOBO 6 SHAKE
128 - 189 GOBO WHEEL ROTATION SLOW - FAST
190 - 193 STOP
194 - 255 GOBO WHEEL ROTATION FAST - SLOW
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can
be connected is 4 fixtures max (120V) and 8 fixtures max (220V).
After the maximum fixtures has been reached you will need to
use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Inno Spot Pro
Power Cord Daisy Chain
