ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 18
ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 19
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressing the ENTER button.
3. On the slave units tap the MENU button until “
Slave Mode
” is
displayed, and Press ENTER. Choose either “
Slave 1
” or “
Slave
2
” and press ENTER. See pages 11-12 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
This function allows you to use a
Elation® universal DMX-512 controller to control the chases and
patterns, dimmer and strobe. A DMX controller allows you to create
unique programs tailored to your individual needs.
1. The Inno Spot Pro is a 14 channel DMX fixture. See pages 21-23
for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 11 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
Sound State
” is displayed, and
Inno Spot Pro
Operation
RPrism Offset
- Home setting adjustment for the
rotating prism.
1. Press the ENTER button for at least 3 seconds, then press the
UP or DOWN buttons so that “
RPrism Offset
” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Focus Offset
- Home setting adjustment for the
focus.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that “
focus
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Inno Spot Pro
System Menu
