ADJ INN119, Руководство пользователя

Страница: 17 / 26

17
P R I M A R Y - S E C O N D A R Y O P E R AT I O N
This function will allow you to link up to 16 units together and operate without a controller. The units
will be sound activated. One unit (designated as the Primary) will act as the controlling unit, and the
others (designated as Secondaries) will react to the controlling units programs. Any unit can act as a
Primary or as a Secondary.
1. Using approved DMX data cables, daisy chain your units together via the XLR connectors on the
rear panel of each unit. Remember the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (Primary) will use the female XLR connector
only, while the last unit in the chain will use the male XLR connector only. For longer cable runs,
the use of a terminator on the last fixture is recommended.
2. On the Primary unit, press the MENU button until “ScND” is displayed, and press ENTER. Use the
UP and DOWN buttons to scroll to the “Pr1” setting and press ENTER.
3. After setting the Primary unit to the Primary setting, find and set your desired operating mode.
4. On the Secondary units, press the MENU button until “ScND” is displayed, and press ENTER.
Choose either “SEC1” or “SEC2” and press ENTER.
5. The Secondary units will now follow the Primary unit.