ADJ INN119, Руководство пользователя

Страница: 16 / 26

16
S Y S T E M M E N U
To enter the home position adjustment menu, unlock the display by pressing the MODE button for at
least 3 seconds. Then press the ENTER button for at least 3 seconds to enter the home adjustment
menu. In this submenu you are able to adjust the original position of the pan position and tilt position.
PINT - Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
“PINT” is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
TINT - Adjustment of the tilt position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
“TINT” is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
Universal DMX Control: This function allows you to use a universal DMX-512 controller to control
the chases and patterns, dimmer and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
• This device has 3 DMX channel modes: 16 channel mode, 19 channel mode, and 22 channel
mode. See the DMX Traits section of this manual for detailed information.
• To control your fixture in DMX mode, follow the set-up procedures in the DMX Set Up section of
this manual, as well as the set-up specifications that are included with your DMX controller, then
set the DMX address on the device.
• The controller’s faders can now be used to control the various DMX fixture traits.
• For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
• For help operating in DMX mode, consult the manual included with your DMX controller.
Sound Active Mode: Allows either single unit or several linked units to run to the beat of the music.
1. Press the MENU button until “SOUN” is displayed, and press ENTER. Press the UP or DOWN
buttons so that “ON” is displayed and press ENTER.
2. Press the MENU button until “SENS” is displayed, and press ENTER. Use the UP and DOWN but-
tons to adjust the sound sensitivity. Press ENTER to confirm your selection.
Show Mode: Allows either a single unit or several linked units to run one of four selectable shows.
1. Press the MENU button until “SHND” is displayed, and press ENTER.
2. Press the UP or DOWN buttons to find your desired show, and press ENTER.