ADJ HYDRO BEAM X12, Инструкция пользователя

Страница: 13 / 41

LAMP INSTALLATION
WARNING! LAMP REPLACEMENT SHOULD ONLY BE DONE BY A TRAINED TECHNICIAN.
1. Turn OFF power and allow approximately 15
minutes for the fixture to cool down.
2. Loosen the screws on the head of the fixture
and open the fixture head covers. Unplug the
fan and loosen the screw that secures the
safety cable.
3. Loosen the screw that holds the lamp in place.
Unplug the leads and lift the lamp out of its
recess. Connect leads to the new lamp (same
model), and place into the lamp recess.
4. Reinstall the head panel, fastening it securely
before reapplying power.
13