ADJ HYDRO BEAM X1, Руководство пользователя, Страница: 15 / 42

15
L A M P I N S TA L L AT I O N
5. Using your fingers, gently pull back the (2) lamp holders, then carefully slide the lamp to the right
and out.
6. Slide the new lamp into its socket by pulling it leftwards against the (2) lamp holders. Use a flat
head screwdriver and turn the lamp centering screw counter-clockwise to its original position.
7. Reconnect the (2) spade terminals to the lamp, then replace the cover and tighten the (4) allen
head screws to secure the cover in place.