ADJ HYDRO BEAM X1, Руководство пользователя, Страница: 13 / 42

13
D I S C H A R G E L A M P W A R N I N G
LAMP REPLACEMENT WARNING
NOTE: The lamp life is represented in “Percentages”.
When the lamp reaches 15% life remaining, the unit’s display will flash the following message:
“Replace The Lamp Soon”. This message will flash for up to 10 minutes. To confirm this warning
and return to normal operation, press the ENTER button.
When the lamp reaches 10% life remaining, the unit’s display will again flash the following
message: “Replace The Lamp Soon”. This message will flash for up to 10 minutes. To confirm this
warning and return to normal operation, press the ENTER button.
NOTE: When the fixture is powered OFF and then back ON again, the fixture display will flash the fol-
lowing message: “Replace The Lamp Soon”.
When the lamp reaches 0% to 5% life remaining, the unit’s display will flash the following mes-
sage: “Replace The Lamp Immediately”. The unit will now NO longer respond to DMX com-
mands, and it will enter hibernation mode. This will disable all fixture functionality with the excep-
tion of a few menu commands. The fixture will continue to enter into hibernation mode when powered
on until the lamp is replaced and the lamp time (LAMP ON TIME-R) has been reset, as detailed in the
System Menu section of this manual.
NOTE: After replacing the lamp, the lamp time MUST be reset. The lamp time must be reset to gain
access to the full system menu.