H2O DMX IR
DMX Control
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller
to control the master dimmer, rotation and
color.
A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The H2O IR is a 3 channel DMX fixture. See page 14 for detailed
description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are includ-
ed with your DMX controller. Follow the instructions on page 8 to
set the DMX address.
3. Use the controller’s faders to control the various DMX fixture traits.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
5. For help operating in DMX mode consult the manual included
with your DMX controller.
Focusing Lens:
The lens can be focused by turning it clockwise or
counter-clockwise.
ADJ Products, LLC - www.adj.com - H2O DMX IR Instruction Manual Page 13
H2O DMX IR
Master-Slave Configuration
Master-Slave Configuration
This function will allow you to link up
to 16 units together and operate without a controller. In a Master-Slave
set up one unit will act as the controlling unit and the others will react
to the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired show. Next, press the MENU
button until “
Slave Mode
” is displayed, and press ENTER. Press
the UP or DOWN buttons so that “
Master
” is displayed and press
ENTER.
3. On the slave units
press the MENU button until “
Slave Mode
” is
displayed, and press ENTER. Press the UP or DOWN buttons so
that either
“
Slave 1
” or “
Slave 2
”
is displayed and press ENTER.
4. The slave units will now follow the Master unit.
ADJ Products, LLC - www.adj.com - H2O DMX IR Instruction Manual Page 12
ADJ-WAV-60W
1.0
2.0
3.0
4.0
Distance(m)
0
0m( )
5.0
(LUX)
Diameter(m)
27
5500 1540 520 394 246
(LUX) 37
7000 2160 816 570 392
27
37
Diameter(m)
0.48 0.96 1.44 1.921 2.401
0.669 1.338 2.008 2.677 3.346
H2O DMX IR
Photometric Chart
