ADJ Products, LLC - www.adj.com - FREQ Matrix Instruction Manual Page 14
ADJ Products, LLC - www.adj.com - FREQ Matrix Instruction Manual Page 13
FREQ Matrix Operation
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns, dim-
mer and strobe. A DMX controller allows you to create unique pro-
grams tailored to your individual needs.
1. The FREQ Matrix has 4 DMX Modes; a 1 Channel Mode, 2
Channel Mode, 16 Channel Mode, & 18 Channel Mode. See
pages 16-17 for a detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 8-9 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
This will allow you to create your own programs.
4. Follow the instructions on page 8 to select your desired DMX
Mode and to set the DMX address. After you have selected your
DMX mode and set the address, then connect your DMX control-
ler.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows a single unit or several units
linked together, to run to the beat of the music. NOTE: When running
the fixture as a single fixture, it must be set to the Master setting.
See page 15 for Master setting.
1. Press the MENU button until
“SOUN” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons until “ON” is displayed and press
ENTER, and then press and hold the MENU button to confirm.
3. To adjust the sound sensitivity press the MENU button until
“SENS” is displayed. Use the UP or DOWN buttons to adjust sen-
sitivity. See page 10 for more info.
4. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See page 15 for UC3
controls and functions.
Show Mode:
This mode allows a single unit or several units linked
together, to run a selected show. NOTE: When running the fixture as
a single fixture, it must be set to the Master setting. See page 15
FREQ Matrix Operation
for Master setting.
1. Press the MENU button until
“SHND” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons until you find your desired show,
press ENTER, then press and hold the MENU button to confirm.
Please see page 9 for more info about Show Mode.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See page 15 for UC3
controls and functions.
Manual Mode:
This mode allows a single unit to run a manual set up.
1. Press the MENU button until
“MANU” is displayed, and press
ENTER.
2. Either “DIMM” or “STRO” will now be displayed. Press the UP or
DOWN buttons to switch between either setting.
3. When you have decided on what setting you would like to adjust
first, press the ENTER button. Use the UP and DOWN buttons to
make adjustments. Once you have made your desired adjust-
ments press ENTER.
4. Once you have finished with your adjustments DO NOT leave this
submenu. If you press the MENU button, all adjustments will be-
lost and you will have to start over.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See page 15 for UC3
controls and functions.