ADJ FREQ Matrix Скачать руководство пользователя страница 1

User Instructions

  FREQ Matrix  

 

                                  Introduction

ADJ Products, LLC  -  www.adj.com  - FREQ Matrix Instruction Manual Page 2

  3/13

Unpacking: 

Thank you for purchasing the FREQ Matrix by ADJ Prod-

ucts, LLC. Every FREQ Matrix has been thoroughly tested and has 

been shipped in perfect operating condition. Carefully check the ship-

ping carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all accessories necessary to operate the unit has 

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Do not return this unit to your dealer without first contact-

ing customer support. 

Introduction: 

The FREQ Matrix is part of ADJ’s continuing pursuit for 

creating high quality affordable intelligent fixtures. The FREQ Matrix is 

a revolutionary 16-zone LED strobe. The unit has 4 operating modes; 

Sound Active (with adjustable sound sensitivity), Show Mode, Manual 

Mode, or DMX Control. This unit can be used as a stand alone fixture, 

or in a Master/Slave configuration. This fixture is suitable for theaters, 

studios, retail stores, and other similar locations. 

 

Customer Support:

 ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question 

should you encounter problems during your set up or initial operation. 

You may also visit us on the web at www.adj.com for any comments 

or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Содержание FREQ Matrix











Отзывы: